MATTAY PlayStation 4 Skin is printed with super-high resolution graphics and ultra high gloss finish. It protects your devices from scratching, fading, and peeling. Our patented advanced air-release vinyl guarantees an excellent installation each time.
– One(1) PS4 Console Skin (Sticker)
– Two(2) PS4 Controller Skin(Sticker)
– One(1) Clean Cloth
– Actual controller no longer included.
1)Clean the unit’s surface as thoroughly as imaginable.Use rubbing alcohol on a lint-free cloth to take away any grease or other contaminates. So much issues of non-sticking are as a result of some form of oil or grease that may be at the unit PRIOR to installation.
2) Peel one piece of the Skin from the paper liner. NOT to let the adhesive side touch anything.
3) Decide the position, apply the Skin(Sticker) to the outside The usage of your fingers or the side of your thumb, ranging from one corner and working your way around the surface.
4) If a piece isn’t going on straight, you’ll be able to gently lift it back up. Don’t stretch it from its original size.
5) If installed slowly and carefully, there will have to be NO air bubbles left under the outside(Sticker). Any air that can develop into trapped under the outside(Sticker) all over installation will go away in time.
Optional: For the most efficient result, apply hot air to the decal surface to turn on chemical agent for better stickiness. The usage of a hair dryer is fine.
Simply peel off the sticker. No sticky mess or residue left.
Give protection to your console perfectly from scratch and dust
Made of prime quality vinyl with high resolution design
Easy to make use of, stick, clean and eliminate
Wonderful fashion design & Come with elegant packaging